Nady Systems GTH-100 I N S Ta L L At I O N, L E G A L I N F O R M At I O N, Inspection, Contents

Models: GTH-100

1 8
Download 8 pages 52.04 Kb
Page 4
Image 4
I N S TA L L AT I O N

I N S TA L L AT I O N

To ensure years of enjoyment from your NADY AUDIO GTH-100, please read and understand this manual thoroughly before using the unit.

INSPECTION

Your NADY AUDIO GTH-100 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit.

[Please note: Nady Systems is not responsible for shipping damage. If your unit is damaged, do not return to Nady, but notify your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made by the consignee in a timely manner.]

CONTENTS

Instruction manual

GTH-100 (verify that the unit’s serial number is same as shown on shipping carton)

FS-2 Dual footswitch

AC Power cord

Warranty Card

POWER CONNECTION

The GTH-100 has an internal power supply and is designed to operate from an external AC source. Power requirements for electrical equipment differ from area to area. Be sure to confirm that the voltage selected by the voltage selector switch on the back panel is proper for your area (120VAC/60 Hz or 230VAC/50Hz) per the information below:

Europe (except UK): 230V, 50Hz

UK and Australia: 240V, 50Hz

USA and Canada: 120V, 60 Hz

For other areas, please check with local authorities.When ready to operate, plug the AC cord into the power source. Make sure that the unit is turned off before connecting to the AC power source to avoid possible loud transients that can damage your speakers or your ears, especially when monitoring with headphones.

L E G A L I N F O R M AT I O N

NOTICE

The information in this document is subject to change, as the Company may make changes to product in order to improve reliability, design, or function, without prior written notice. No part of this manual may be reproduced or transmitted in any form or by any means without the written permission of the company.

IN NO EVENT WILL THE COMPANY BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING DIRECTLY OR INDIRECTLY, SUCH AS LOSS OF PROFIT OR GOOD WILL, THAT MAY BE SUFFERED IN CONNECTION WITH THE PURCHASE OF THIS PRODUCT OR FROM THE BREACH OF ANY REPRESENTATION OR WARRANTY.

LICENSE

The Company grants the customer a non-exclusive, non-transferable license to use the software, if any, accompanying this product for internal use on a single computer system. The end user may make a single copy of the software solely for backup purposes; otherwise, no copies may be made of the software or any part thereof. No other license of any kind is granted to any part of the product or any of the intellectual property therein.

4

Page 4
Image 4
Nady Systems GTH-100 I N S Ta L L At I O N, L E G A L I N F O R M At I O N, Inspection, Contents, Power Connection