Nady Systems MPM 8175x owner manual Specifications, Power AMP Output, Inputs

	SPECIFICATIONS
POWER AMP OUTPUT
8Ω Total Impedance		100W
4Ω Total Impedance		175W
INPUTS
1/4” TRS balanced/unbalanced mic/line level		8
XLR balanced mic level		8
RCA tape input		2
CHANNELS		Rotary Control
Level
Effect		Rotary Control
Low EQ		80Hz ±15dB
Hi EQ		12KHz ±15dB
MASTER SECTION		Rotary Control
Master Volume
Delay On/Off		Push Button Switch
Digital Delay Level		Rotary Control
Digital Delay Time (80mS, 120mS, 160mS, 200mS)		4-position Rotary Switch
AUDIO		>120dB
S/N Ratio
THD Power output, 20Hz to 20KHz		<0.1%@100W/4 ohms
CROSSTALK (1KHz @ 0dBu, channel in to master.......................................................................................................................................................................output)		<-65dB
Channel fader down
FREQUENCY RESPONSE (Mic input to output)		±2dB
Line level o/p @ +4dBu into 600Ω .
Power amp o/p 1 watt into 8Ω		±2dB
SENSITIVITY @ MIXER OUTPUT +4dBu with Master and channels controls set to MID
Mic/Line		-42dB/-22dB
Tape in		-10dB
MAX INPUT LEVEL		-5dB
XLR
1/4”		+16dB
MICROPHONE PREAMP E.I.N. (150( Terminated, max. Gain)		<-120dBm
POWER CONSUMPTION		200W
POWER REQUIREMENTS		105-125VAC, 220-240VAC, 50-60 Hz
FUSE	5x20mm glass type 4A/250V for 115VAC, 2A/250V for 230VAC, fast-blow fuse
DIMENSIONS (H x W x D)		5.25”x 19.25”x 9.5” (13.3 x 48.9 x 24.1 cm)
WEIGHT		19.3 lbs. (8.8 kg)

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.

9