Specifications

APPLICATIONS

Note: If the P.A. speakers are operated in mono,

the second channel of the MSE-100A can be used for another application.

ENHANCING THE SOUND OF MONITOR SYSTEMS The MSE-100A can be effectively used to improve the sound of stage monitor systems. Here intelligibility and transparency are of paramount importance during sound reproduction. For this purpose, the MSE-100A is inserted either in the “monitor send” path or between monitor mixer and power amplifier.

SOUND ENHANCEMENT IN HI FI AND VIDEO

Of course, the MSE-100A can also be used in Hi Fi and video applications. The unit is simply placed between the signal source (cassette recorder, tuner, VCR, etc.) and the power amplifier. We recommend using the “tape monitor” inputs most preamplifiers provide, thus the MSE-100 A can be switched into any signal source.

Using the MSE-100A in a Hi Fi system

The NADY MSE-100 A can be used for improving audio for:

•Disc and tape recordings

•Recorded video and audio cassettes

•Radio reception

•TV reception

INPUT

Type	RF filtered, servo-balanced input
Connectors	XLR and 1/4” TRS jacks
Impedance	24K Ω	balanced,
Max. Input Level	12K Ω	unbalanced
	+21dBu balanced and unbalanced
CMRR	Typically 40dB, > 55dB @ 1kHz

MULTIBAND PROCESSOR

Type	“Natural Sonic” processor with
	“Variable Sound Processing”
Tune Control	Variable (1 to 8kHz).
Process Control	Variable (Enhancer to Exciter)
High Mix Control	Variable (0 to 6; Off to Max.)

OUTPUT

Type	DC-decoupled unbalanced
	output stage
Connectors	XLR and 1/4” TRS jacks
Impedance	90 Ω balanced, 45 Ω unbalanced
Max. Output Level	+21dBu balanced and unbalanced
Bandwidth	20Hz to 20kHz, +0/-0.5dB
Frequency Response	5Hz to 100kHz, +0/-3dB
Noise	> -95dBu, unweighted, 22Hz to
	22kHz
THD	0.008% typically @ +4dBu,1kHz
IMD	0.01% typically, SMPTE
Crosstalk	< -86dB, 22Hz to 22kHz

FUNCTION SWITCHES

IN/OUT switches both channels, with red/green LED status indicators

POWER SUPPLY

AC Voltage	100-120/60HZ or 200-240/50HZ
	VAC as marked
Power consumption	9 watts
Fuse	T250mA, 250V
Power Cord Connector ..	Standard IEC receptacle

DIMENSION

1.75” X 19” X 7.8” (44 X 482 X 197mm.)

BASS PROCESSOR

Type	“Dual Mode” Bass Processor
	Switches the bass sound
	from “Soft” to “Tight”
Low Mix Control	Variable (0 to 6; Off to Max.)

WEIGHT

6.2 lbs. (2.8 Kg.)

Specifications and design subject to change without prior notice for improvement purposes

Nady Systems MSE-100A owner manual Specifications, Sound Enhancement in HI FI and Video

Models: MSE-100A