Manuals / Nady Systems / Musical Instruments & Equipment / Microphone

Nady Systems ENCORE1HTSYSF, NADYENCORE1LTOB, ENCORE1LTON manual WHT Handheld Microphone Transmitter

Models: ENCORE1HTSYSN ENCORE1HTSYSG1 ENCORE1LTOB ENCORE1LTOE ENCORE1HTSYSD ENCORE1 ENCORE1HTSYSF ENCORE1LTOH NADYENCORE1LTOB ENCORE1HTSYSA ENCORE1HTSYSH ENCORE1HTSYSB ENCORE1LTOD ENCORE1LTOF ENCORE1HTSYSE ENCORE1LTOG1 ENCORE1LTON

1 16
Download 16 pages 8.81 Kb
Page 7
Image 7

WHT HANDHELD MICROPHONE TRANSMITTER

1.Unscrew the BATTERY COMPARTMENT COVER (17) and remove, exposing the BATTERY HOLDER (18). Insert a fresh 9V ALKALINE BATTERY (19), observing the correct polarity as marked, and screw the cover back on to the microphone. Make sure the cover is screwed on completely. A fresh alkaline battery can last up to 16 hours in use, but in order to ensure optimum performance, it is recommended that you replace the battery after every 10 hours of use.

2.Turn on the WHT by sliding the OFF/STANDBY/ON SWITCH (20) to the STANDBY position (transmitter on, audio muted) or the ON position (transmitter and audio both on). The BATTERY INDICATOR LED (21) will give a single quick flash, indicating usable battery strength. In the case of a dead or low battery, the LED will either not go on at all or will stay on continuously, indicating that the battery should be replaced with a fresh one. To preserve battery life, turn the transmitter off when not in use.

3.The microphone is now ready to use. Most or all of the RF LEVEL DISPLAY LEDs (4) on the Encore I receiver should now be lit, indicating a received signal from the transmitter. When ready to speak, slide the transmitter switch to the ON position.

Adjust the volume of the receiver as per the Audio Output Microphone Connection section of the above Encore I receiver instructions. The AF LEVEL LED DISPLAY (5) on the Encore I receiver will light up to 5 LEDs (4 green and 1 red) for all input signals. Occasional flickering on and off during use of the top red LED indicator in this display is normal, however if the red LED stays on continuously, it means the signal is too loud and there is the possibility of overload distortion. Back off from the microphone until the red LED indicator only flickers on peaks.

[Note: Microphone elements can easily be destroyed by the buildup of salts and minerals from perspiration and saliva. It is good practice to put a windscreen on the mic element at all times to protect it.]

7

Page 6 Page 8
Page 7
Image 7
Nady Systems ENCORE1HTSYSF, NADYENCORE1LTOB, ENCORE1LTON, ENCORE1LTOE, ENCORE1LTOH manual WHT Handheld Microphone Transmitter
Page 6 Page 8

ENCORE1HTSYSN, ENCORE1HTSYSG1, ENCORE1LTOB, ENCORE1LTOE, ENCORE1HTSYSD specifications

Nady Systems has a reputation for innovative solutions in the field of wireless audio technology, and its ENCORE series embodies this commitment to quality and performance. Among the standout offerings are models ENCORE1LTON, ENCORE1LTOG1, ENCORE1HTSYSE, ENCORE1LTOF, and ENCORE1LTOD. These models cater to various needs, making them suitable for musicians, performers, and audio professionals seeking reliable wireless systems.

The ENCORE1LTON is designed for clear vocal reproduction, featuring a handheld transmitter and a compact receiver that operate on UHF frequency bands. It provides a flexible 100 selectable channels, ensuring interference-free operation. The built-in frequency scanning capability automatically detects the best available frequencies within the operating range. Additionally, the rapid setup and user-friendly interface make it accessible for both novice and seasoned users.

ENCORE1LTOG1 operates similarly, but it includes a guitar transmitter, making it perfect for electric guitarists seeking freedom of movement on stage. The low-latency design offers real-time audio transmission, which is essential for a seamless performance. This model also benefits from superior battery life, delivering up to eight hours of continuous use on a single charge.

The ENCORE1HTSYSE model is an all-in-one solution that combines both handheld and bodypack transmitters. This versatility allows performers to switch effortlessly between different vocal styles or instruments. Its robust construction and advanced technology ensure reliability even in rugged performance environments, making it a solid choice for touring musicians.

For musicians who require a dedicated microphone setup, the ENCORE1LTOF features a specialized handheld microphone optimized for vocal clarity. This model incorporates advanced compression and expansion circuits to minimize feedback and enhance audio quality. Moreover, it includes a waste-free charging system, which is both eco-friendly and efficient.

Finally, the ENCORE1LTOD is tailored for more extensive systems, allowing for multi-channel operation. This model excels in larger venues, where multiple performers may need to operate simultaneously without interference. It includes a rack-mountable receiver, which simplifies integration into existing sound systems.

In summary, the Nady Systems ENCORE series, including models ENCORE1LTON, ENCORE1LTOG1, ENCORE1HTSYSE, ENCORE1LTOF, and ENCORE1LTOD, showcases cutting-edge technologies in wireless audio transmission. From versatile setups for performers to dedicated solutions for specific applications, these models cater to a wide range of audio needs while maintaining high standards of performance and reliability.