Manuals / Nady Systems / Musical Instruments & Equipment / Microphone

Nady Systems ENCORE1LTOF, NADYENCORE1LTOB, ENCORE1LTON, ENCORE1LTOE, ENCORE1LTOH, ENCORE1HTSYSN manual

Models: ENCORE1HTSYSN ENCORE1HTSYSG1 ENCORE1LTOB ENCORE1LTOE ENCORE1HTSYSD ENCORE1 ENCORE1HTSYSF ENCORE1LTOH NADYENCORE1LTOB ENCORE1HTSYSA ENCORE1HTSYSH ENCORE1HTSYSB ENCORE1LTOD ENCORE1LTOF ENCORE1HTSYSE ENCORE1LTOG1 ENCORE1LTON

1 16
Download 16 pages 8.81 Kb
Page 9
Image 9

WLT LAVALIER/LAPEL OR HEADWORN

MICROPHONE BODYPACK TRANSMITTER

1.Snap open the BATTERY COMPARTMENT (22) and insert a fresh 9V BATTERY (23), observing the correct polarity. Close the compartment.

2.The WLT is provided with a 3.5 mm LOCKING JACK (24) for connecting the microphone. Plug in either the LAVALIER/LAPEL (25) or the HEADWORN MICROPHONE (26), as supplied. To secure the connection, turn the metal slip ring on the plug clockwise to thread it on to the jack. To unplug, reverse the process.

Slip the transmitter into a pocket or clip on to your clothes. To use the lavalier mic, attach it at chest level. Do not place too close to the mouth—a distance of about six inches usually works best. To use the headworn mic, place it on the head and adjust the mic boom so that the mic is about one inch to the side of the front of the mouth. (Note: The lavalier or headworn mic wire is also the transmit antenna, and rolling up or shortening the wire may reduce the effective operating range. Extend the wire fully during use, and keep it as straight as possible.)

3.Turn on the WLT by sliding the OFF/STANDBY/ON SWITCH (27) to the STANDBY position (transmitter on, audio muted) or the ON position (transmitter and audio both on). The BATTERY INDICATOR LED (28) will give a single quick flash, indicating usable battery strength. In the case of a dead or low battery, the LED either will not go on at all or will stay on continuously, indicating that the battery should be replaced with a fresh one.

4.The microphone is now ready to use. Most or all of the RF DISPLAY LEDs (4) on the Encore I receiver should now be lit, indicating a received signal from the transmitter. When ready to speak, slide the transmitter switch to the ON position and adjust the volume of the receiver as per the Audio Output Microphone

Connection section of the above Encore I receiver instructions. The AF LEVEL LED DISPLAY (5) on the Encore I receiver will light up to 5 LEDs (4 green and 1 red) for all input signals. Occasional flickering on and off during use of the top red LED indicator in this display is normal, however if the red LED stays on continuously, it means the signal is too loud and there is the possibility of overload distortion. Re- position the microphone farther from the source or adjust the AUDIO INPUT LEVEL CONTROL (29) until the red LED indicator flickers only on the loudest inputs.

(Note: Observe care in selecting P.A. volume, transmitter location and speaker placement so that acoustic feedback (howling and screeching) will be avoided. Please also observe the pickup patterns of the microphone selected: omnidirectional mics pick up sound equally from all directions and are prone to feedback if not used carefully. Unidirectional mics are more resistant to feedback, but pick up sound sources best that are directly in front of the mic. Also, mics that are farther from the sound source, such as lavaliers, require more acoustic gain and thus are also more prone to feedback than close-source mics such as handheld or headworn mics that are used close to the mouth.)

(Note: Microphone elements can easily be destroyed by the buildup of salts and minerals from perspiration and saliva. It is good practice to put a windscreen on the mic element at all times to protect it.)

9

Page 8 Page 10
Page 9
Image 9
Nady Systems ENCORE1LTOF, NADYENCORE1LTOB, ENCORE1LTON, ENCORE1LTOE, ENCORE1LTOH, ENCORE1HTSYSN, ENCORE1HTSYSB, ENCORE1LTOG1 manual
Page 8 Page 10

ENCORE1HTSYSN, ENCORE1HTSYSG1, ENCORE1LTOB, ENCORE1LTOE, ENCORE1HTSYSD specifications

Nady Systems has a reputation for innovative solutions in the field of wireless audio technology, and its ENCORE series embodies this commitment to quality and performance. Among the standout offerings are models ENCORE1LTON, ENCORE1LTOG1, ENCORE1HTSYSE, ENCORE1LTOF, and ENCORE1LTOD. These models cater to various needs, making them suitable for musicians, performers, and audio professionals seeking reliable wireless systems.

The ENCORE1LTON is designed for clear vocal reproduction, featuring a handheld transmitter and a compact receiver that operate on UHF frequency bands. It provides a flexible 100 selectable channels, ensuring interference-free operation. The built-in frequency scanning capability automatically detects the best available frequencies within the operating range. Additionally, the rapid setup and user-friendly interface make it accessible for both novice and seasoned users.

ENCORE1LTOG1 operates similarly, but it includes a guitar transmitter, making it perfect for electric guitarists seeking freedom of movement on stage. The low-latency design offers real-time audio transmission, which is essential for a seamless performance. This model also benefits from superior battery life, delivering up to eight hours of continuous use on a single charge.

The ENCORE1HTSYSE model is an all-in-one solution that combines both handheld and bodypack transmitters. This versatility allows performers to switch effortlessly between different vocal styles or instruments. Its robust construction and advanced technology ensure reliability even in rugged performance environments, making it a solid choice for touring musicians.

For musicians who require a dedicated microphone setup, the ENCORE1LTOF features a specialized handheld microphone optimized for vocal clarity. This model incorporates advanced compression and expansion circuits to minimize feedback and enhance audio quality. Moreover, it includes a waste-free charging system, which is both eco-friendly and efficient.

Finally, the ENCORE1LTOD is tailored for more extensive systems, allowing for multi-channel operation. This model excels in larger venues, where multiple performers may need to operate simultaneously without interference. It includes a rack-mountable receiver, which simplifies integration into existing sound systems.

In summary, the Nady Systems ENCORE series, including models ENCORE1LTON, ENCORE1LTOG1, ENCORE1HTSYSE, ENCORE1LTOF, and ENCORE1LTOD, showcases cutting-edge technologies in wireless audio transmission. From versatile setups for performers to dedicated solutions for specific applications, these models cater to a wide range of audio needs while maintaining high standards of performance and reliability.