INSTALLATION
To ensure years of enjoyment from your NADY AUDIO PSS-300 Portable Sound System, please read and understand this manual thoroughly before using the unit.
1. INSPECTION
Your NADY AUDIO PSS-300 Portable Sound System was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit.
[Please note: Nady Systems is not responsible for shipping damage. If your unit is dam- aged, do not return to NADY, but notify your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made by the consignee in a timely manner.]
CONTENTS:
•PSS-300 Mixer Section (with mic stand adapter)
•PSS-300 Left Speaker (with pole mount adapter)
•PSS-300 Right Speaker (with pole mount adapter)
•(2x) 2 18’ Speaker Cables
•AC cord
•Instruction Manual
•Warranty Card
2. SETUP
After transporting the PSS-300 to the desired location, stand the unit upright so that the feet of the speaker are down on an even surface. Unscrew and carefully remove the ampli- fier from the back of the speaker if desired and place on a flat surface. Unscrew the acces- sory panel of the 2nd speaker to retrieve the included speaker and power cables. Replace the accessory panel and tighten screw until secure.
Mixer Section
Position the PSS-300 mixer section on its flat surface, or use the included mic stand adapter to mount to an optional mic stand, with the control panel facing up. Parts of the unit can become very warm during use. This is normal during operation. Care should be taken to ensure that there is enough space behind the Mixer Section for cooling. Also, do not place the Portable Sound System on high temperature devices such as power amplifiers, etc., or the unit may overheat in operation.
Although the PSS-300 is shielded against radio frequency (RF) and electromagnetic interference (EMI), extremely high fields ofRF and EMI should be avoided.
Please make sure that the power is rated properly for the required voltage (110VAC/60 Hz). Power requirements for electrical equipment differ from area to area. In new installations and portable sound systems, or any situation in which the AC power is in question, it is wise to confirm the voltage before connecting it to power sources.
Europe (except UK): 230V, 50Hz UK and Australia: 240V, 50Hz USA and Canada: 120V, 60 Hz For other areas, please check with local authorities.
