CONTROLS AND CONNECTORS

FRONT PANEL

(4)

(3)

(2)

(1)

REAR PANEL

(5)

(6)

(7)

(8)

(9)

Front Panel

(1) POWER SWITCH

Use this switch to power unit ON or OFF. The integrated LED will light when the unit is ON. Before turning on this unit, verify connection to the proper voltage AC source, check all connections and turn down the level controls of equipment connected to the outputs.

(2) BASS & TREBLE TONE CONTROLS

Adjust the relative balance of bass and treble

(3) MASTER LEVEL CONTROL

Adjusts the master level of the combined individual channel signals

(4) CHANNEL GAIN CONTROLS

Adjust the individual (1-6) channel gains

Rear Panel

(5)AC POWER CORD IEC CONNECTOR WITH INTEGRATED FUSE HOLDER

This standard IEC power cord receptacle is used to connect the AC power to your unit. It features a built-in fuse holder for a 5X20mm, 0.5A/250V slow-blow fuse. If the fuse continuously blows, shut of the unit and have it serviced by qualified service personnel.

(6) AC VOLTAGE SELECT SWITCH

Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz).

(Note: Use at the improper voltage can damage your unit and void the warranty.)

(7) HIGH/LOW OUTPUT LEVEL SELECT SWITCH

Selects either high or low output so the level can be optimized for the connected audio equipment (amp, recording device, etc.)

(8) MIXER OUTPUTS

Unbalanced 1/4" (6.3mm) and balanced XLR outputs

(Note: Only one output (1/4" or XLR) can be used at one time. Do not connect to both at the same time, or the signal will be severely distorted.)

(9) MIXER INPUTS

Unbalanced 1/4"(6.3mm) and balanced XLR inputs for channels 1 through 6.

(Note: Channels 4, 5 and 6 provide +15V phantom power for condenser mics. These can be safely used with any balanced dynamic mic also; however, do not connect any unbalanced dynamic microphones to the XLR balanced inputs as they may be damaged.)

(Note: Only one input per each channel (1/4" or XLR) can be used at one time. Do not connect to both at the same time or the signal will be severely distorted.)

5

Page 4 Page 6
Page 5
Image 5
Nady Systems RMX6 owner manual Controls and Connectors
Page 4 Page 6

RMX6 specifications

Nady Systems has been a pioneer in wireless technology and audio equipment for over three decades, and its RMX6 portable mixer stands as a testament to their commitment to innovation and quality. The RMX6 is engineered for professionals who require versatility without compromising on sound fidelity, making it an ideal choice for musicians, sound engineers, and event organizers.

One of the most notable features of the RMX6 is its compact design. Weighing in at a lightweight 3.5 pounds, it easily fits into any studio setup or travel bag, allowing for seamless portability. This mixer is equipped with six input channels, accommodating a variety of audio sources including microphones, instruments, and line-level devices. The channels are designed with individual gain controls, allowing users to tailor the audio levels for optimal sound clarity.

The RMX6 employs a true stereo output, providing a versatile monitoring option for live performances and studio recordings. Additionally, two built-in effects processors empower users to enhance their audio with reverb and delay effects, adding depth and character to live sound or recordings. The easy-to-navigate control interface allows users to adjust settings quickly, making it popular for fast-paced environments.

Another standout technology in the RMX6 is its robust connectivity options. This mixer features balanced XLR, 1/4-inch, and RCA outputs, ensuring compatibility with professional audio gear. Moreover, it includes a headphone output for direct monitoring, providing the ability to hear audio cues without latency. The RMX6 also incorporates tools like phantom power for condenser microphones, making it suitable for a range of audio applications.

Among the characteristics that set the RMX6 apart is its durability. Constructed with high-quality materials, it is built to withstand the rigors of touring and frequent use. Its intuitive layout encourages quick setup and ease of use, which is paramount in live performance scenarios.

In conclusion, the Nady Systems RMX6 is not just a portable mixer; it is a multifaceted tool that combines portability, versatility, and high-quality sound. Whether used for live performances, studio recordings, or events, the RMX6 stands ready to meet the diverse needs of audio professionals everywhere. As technology continues to advance, the RMX6 remains an essential component for anyone seeking reliable and high-performance audio solutions.
Top Page Image Contents