Nady Systems SW-1KU owner manual Specifications

Specifications

SYSTEM OVERALL SPECIFICATIONS
Operating Frequency Range	(U.S.) Band 1: 672.000-696.975MHz, (Int.) Band 2: 795.000-
	819.975MHz
Freq. Synthesized	(1000 channels switchable) 25kHz/ step
PLL System Frequency Stability	<0.005%
Frequency Response	30Hz-18kHz +/-3dB
Dynamic Range	120dB
Harmonic Distortion	<0.5%
Modulation	FM (F3E) +/-25kHz normal, +/-75kHz max
Operating Range	150-250 feet typical, 500+feet max line-of-sight
8W-1KU RECEIVER SPECIFICATIONS
Receiver System	Dual conversion Super Heterodyne with True Diversity
	(Two complete receiver sections with optimum audio selected)
Selectivity	60dB, normal +/-75kHz offset
Image Rejection	-70dB, minimum
Sensitivity	-107dBm, normal
Spurious Rejection	65dB, normal
Mute Threshold	-65dBm to -95dBm (adjustable)
Controls	UP/DOWN selection, SET, IR Sync, Power ON/OFF buttons,
	and MUTE Level control
LCD Display	Backlight LCD panels indicating selected Group/Channel, Received
	RF levels, and unbalanced Line out Volume levels
LED Display	A/B diversity LEDs indicating received signal from transmitter
	AF/Peak LED indicating received audio levels from transmitter
Audio Output Level	Unbalanced output: LINE Level output adjustable
	Balanced output: MIC level output fixed
Output Impedance	Balanced: 600 Ω and unbalanced: 1.0k Ω
Power Requirement	Regulated
	+12VDC/2500mA
Antennas	Dual BNC right angle
Dimensions	17”W x 11.5”D x 3.75”H (43.2cm x 29.2cm x 9.53cm)
Weight	10.75 lbs (4.88 Kg)
Housing Construction	Metal
HT-1KU HANDHELD TRANSMITTER SPECIFICATIONS
RF Output Power	HI/LOW selectable
	HI: +14dBm (25mW typical), LOW: +4dBm (2.5mW typical)
Harmonic and Spurious Emission	-50dBc normal
Audio Input Levels	24mV for +/- 25 KHz deviation
Impedance	6.0 kΩ
Controls	Power ON/OFF, RF Power HI/LOW switches, Set/Up/Down
LCD Display	Group/Channels/ Input Volume/ Battery Levels
Antenna Type	Integral
Battery Type	2 x AA alkaline batteries operation
Battery Life	8-10 hours typical
Dimensions	10”L x 2”D (25.4 cm x 5.1 cm)
Weight (w/o batteries)	11 oz (0.312 kg)
Housing Construction	Metal
BT-1KU BODYPACK TRANSMITTER SPECIFICATIONS
RF Output Power	Hi/Lo selectable
	HI: +14dBm (25mW typical), LOW: +4dBm (2.5mW typical)
Harmonic and Spurious Emission	-50dBc normal
Audio Input Levels	(Lapel/Lavaliere—LT)/ (Headmic™ LT/HM)/ (Instrument—GT)
Input Impedance	5kΩ (Lav Mic), 500 kΩ (Instr.)
Controls	Power OFF/MUTE/ON, RF Power HI/LOW switches, Set/Up/Down
Input Connector	Mini 3.5mm with locking nut

17