mic with respect to the audio source will ensure the optimum results you are seeking in any given applica- tion. You may experience a delay in hearing your audio input to the mic if monitoring in real time. Such a slight delay is called “latency” and is common for many types of software used with this unit. If real time coincidence of the input and amplified signal heard though the computer monitors is required then special software may be required.
SPECIFICATIONS
Frequency Response | 50 Hz - 15 KHz |
Sensitivity (@1kHz, 74dB S.P.L.) | |
Maximum S.P.L. (THD ≤1% 1KHz) | 120dB |
Connector | USB (for USB port 2.0 or higher) |
Computer/Software | Works with most DAW audio software for PC and Mac |
Analog to Digital Conversion | |
Mic Cable | 10’ (3m) |
Dimensions (length x diameter) | 7” x 2” (180mm x 50mm) |
Weight .... | 5 oz (140 g) |
Material | |
Ballscreen. | Steel mesh |
PRECAUTIONS AND CARE
•The microphone should never be dropped or subjected to extreme shock. Store only in a padded case to protect it during transport.
•Keep the microphone away from extremely high temperatures (above 140°F or 60°C )and humidity. Avoid leaving the microphone in direct sunlight for long periods of time.
•When using the microphone outdoors, avoid getting it wet.
•To protect the mic cartridge and ensure the longest possible useful life, it is highly recommended that for vocal applications, an external foam windscreen be used over the ball grille. This will prevent the buildup of saliva and perspiration on the cartridge diaphragm, which degrades performance and shortens the useful life of the microphone. Such a wind “sock” will also eliminate wind noise when the mic is used in a windy outdoor environment.
FREQUENCY RESPONSE & POLAR PATTERN
(dBV/Pa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
30 | 50 | 100 | 200 300 | 500 | 1k | 2k | 3k | 5k | 10k | 20kHz |
SERVICE |
|
|
|
|
|
|
|
|
|
|
(U.S.) Should your Nady
(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. The warranty card supplied with this system provides valuable warranty and service information. Store it in a safe place for future reference. Do not attempt to service this unit yourself as it will void your warranty.
NADY SYSTEMS, Inc.
6701 Shellmound Street • Emeryville, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
