12.2Versatile
Snap any of the three connectors into place in seconds:
12.3Battery Clamps
Connect the clamps to the charger. Refer to sections 7 and 8 to connect the output clamps to the battery. After a solid electrical connection is made to the battery, plug the power cord into a 120V AC electrical wall outlet.
12.412V Accessory Plug
Charge or maintain your battery without lifting the hood. Connect the 12V adapter to the charger and plug into the 12V accessory outlet. Route the power cord from charger through the vehicle’s open window and plug into a 120V AC electrical wall outlet. Make sure to place charger on a dry, non- flammable surface, like metal or concrete.
12.5Ring Connectors
The ring connectors permanently attach to the battery providing easy access to quickly charge your battery. This application is appropriate for motorcycles, lawn tractors, ATVs and snowmobiles. To permanently attach to a battery, loosen and remove each nut from bolts at battery terminal. Connect the red POSITIVE ring connector ring to the POSITIVE battery terminal. Connect the black NEGATIVE connector ring to the NEGATIVE battery terminal. Replace and tighten the nuts to secure. Take care to keep both wires and plug away from metal and the engine hood. Plug the power cord into a 120V AC electrical wall outlet.
13.MAINTENANCE INSTRUCTIONS
The charger is designed and built with high quality materials requiring only a minimum amount of care.
13.1Clamps should be cleaned each time the charger is used to prevent corrosion from battery fluid.
13.2Cords should be coiled when the charger is not being used to prevent damage.
13.3Other servicing should be performed by qualified service personnel.
• 11 •
