10.5CAUTION - Do not leave Manual chargers unattended.

10.6CAUTION: If at any time the battery gets hot (above 125°F (52°C)) or acid comes out of vent caps, STOP charging.

10.7To maximize battery life - Let automatic chargers complete charging.

11.MULTIPLE BATTERY CHARGING

Batteries of the same voltage may be connected in parallel for maintenance charging. Charge time increases in proportion to the number of batteries. Rate of charge decreases in the same proportion.

Example: Charging 2 batteries in parallel will take 2 times longer; each battery receives 1/2 the amount of charge showing on the ammeter. Thus, if the ammeter shows a 30-amp charge, each battery will get a 15-amp charge (when batteries have the same rating, same state of charge, etc.).

12.CHARGER FEATURES AND CONTROLS

12.1BATTERY SIZE SWITCH

Use this switch button to set the battery size to one of the following:

2A SMALL: Intended for charging small batteries such as those commonly used in garden tractors, snow mobiles and motorcycles. The 2A rate is not intended to be used as a trickle charger for larger batteries.

6A MEDIUM or 10A LARGE: Use for charging automotive batteries, marine batteries, and deep cycle batteries. Not intended for industrial applications.

12.2BATTERY TYPE SWITCH

Use this switch button to set the type of battery to be charged to one of the following.

10

Page 12
Image 12
Napa Essentials 85-510 Multiple Battery Charging, Charger Features and Controls Battery Size Switch, Battery Type Switch