12.8COMPLETION OF CHARGING
Charge completion is indicated by the CHARGED (green) LED; when lit, the charger has stopped charging and switched to the Maintain Mode of operation.
12.9MAINTAIN MODE
When the CHARGED (green) LED is lit, the charger has started Maintain Mode. This mode of operation is also known as
In this mode, the charger keeps the battery fully charged by delivering a small current, when necessary. The voltage is maintained at a level determined by the BATTERY TYPE selected.
12.10GENERAL CHARGING NOTES
If the charge mode is changed after charging has started (by pressing the BATTERY SIZE or BATTERY TYPE button), the charging process will be restarted.
12.11Relay
Your charger is equipped with a relay. This device turns the charge current on and off to the battery. It is normal to occasionally hear a clicking sound when the relay is turned on or off.
12.12Fan
Your charger is equipped with a fan. It is normal for the fan to be on all the time. Keep the area near the charger clear of obstructions to allow the fan to operate efficiently.
12.13WARNING: At higher amp rates, it becomes easier to boil and overcharge the battery. Do not leave the charger unattended. Refer to the battery manufacturer’s charging instructions. Use the Charging Time Chart in section 10 to determine how long to charge.
13.MAINTENANCE INSTRUCTIONS
The charger is designed and built with high quality materials requiring only a minimum amount of care.
13.1Clamps should be cleaned each time the charger is used to prevent corrosion from battery fluid.
13.2Cords should be coiled when the charger is not being used to prevent damage.
13.3Other servicing should be performed by qualified service personnel.
• 12 •
