Manuals / Napco Security Technologies / Household Appliance / Home Security System

Napco Security Technologies F-TPG manual Bypassing Faulted Zones, Press the BYPASS button

Models: F-TPG

1 28

Page 7

BYPASSING FAULTED ZONES

If you are trying to arm with a faulted zone or zones, the green READY light will be blinking out the number of the faulted zones. If you cannot repair the zone(s), they may be temporarily removed from the system, or bypassed, using the fol- lowing procedure:

1		Press the BYPASS button.
1

TBL		The Garage Touchpad will beep and the yellow Trouble indicator will light ON STEADY.

2		Press either the STAY or AWAY button.
2

3		If arming AWAY, open the garage door and exit. (Note: See page 13 if your garage door mo-
3		tor fails).
		tor fails).

4		The system will arm with the faulted zones bypassed.
		When the garage door closes, the Garage Touchpad will give one chirp to indicate the system has
		armed.

Warning: Bypassed zones are unprotected. If a faulted zone cannot be secured, have the system checked as soon as possible.

Page 7

Image 7

Napco Security Technologies F-TPG Bypassing Faulted Zones, Press the BYPASS button, Press either the STAY or AWAY button

Contents

F-TPGGarage Touchpad Home Security System Using yourNAPCO FREEDOMIMPORTANT - TEST YOUR SYSTEM WEEKLY INTRODUCTIONFrom a Ready Condition Disarmed State IF THE ALARM IS SOUNDING TABLE OF CONTENTSwith caution! See pages TABLE OF CONTENTSREADY ARMED STAY FIRE TBL GARAGE TOUCHPAD INDICATORSEMERGENCY BUTTONS GARAGE TOUCHPAD CONTROLSPress the AWAY button on the Touchpad ARMING WHEN LEAVINGREADY ARMEDPress the BYPASS button BYPASSING FAULTED ZONESPress either the STAY or AWAY button Press the STAY button on the Touchpad ARMING WHEN STAYING HOMEARMED STAYSTAY Check the Garage Touchpad indicatorsARMING AND LEAVING WITH OTHERS STAYING READYSTAY EXITING WITH THE SYSTEM ALREADY ARMEDExit the garage ARMEDgarage and close the door EXITING WITH THE SYSTEM ALREADY ARMEDARMED Press the AWAY button on the TouchpadEMERGENCY BUTTONS GARAGE DOOR MOTOR FAILURE DISARMING WHEN RETURNING HOMEDISARMING WHEN HOME ARMED STAY DISARMING THE SYSTEMARMED SILENCING AN ALARMIf an alarm occurs while you are at home If an alarm occurs while you are awayFIRE FIRE PROTECTIONFIRE Fire-ZoneTroubleImportant! - Read Carefully Would You Like More Safety Information?Preparing a Fire Escape Plan Family RehearsalREADY SYSTEM TROUBLE ERROR CODESTBL Flashes SYSTEM TROUBLE ERROR CODESREADY ZONE ZONE ZONE ZONE ZONE ZONE ZONE ZONE ZONE LISTAdding additional IFOBs to your system ENROLLING A NEW F - IFOBRemoving IFOBs from the system Lost Opener Mode LOST GAR AGE DOOR OPENER MODEThis equipment is hearing-aidcompatible WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM Page NAPCO LIMITED WARRANTY NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY RADIO AND TELEVISION INTERFERENCE THE FOLLOWING STATEMENT IS REQUIRED BY THE FCCFor Sales and Repairs For Technical ServicePublicly traded on NASDAQ Symbol NSSC 333 Bayview Avenue Amityville, New York

BYPASSING FAULTED ZONES

Press the BYPASS button.

Press either the STAY or AWAY button.