8
FINISHING
DOOR OPENING & CLOSING
L36 LOUVRE INSTALLATION
The upper louvres must be removed to allow the door to be opened or closed. To access the lower door latch, open the valve con- trol door. Release the top and bottom door latches, lo- cated at the right side of the door.
FIGURE 13
FLANGE
CLIP
UPPER LOUVRE
DOOR LATCH
FIGURE 17
A
GVFL LOUVRE INSTALLATION
UPPER LOUVRES: Insert the upper louvres into the slots on both brackets. Press the top flange of the hood into the four clips located along the top of the unit as shown.
FIGURE 14
LOWER LOUVRES: Attach each hinge to the firebox with 2 screws. door and optional louvre.
FIGURE 15
HOOD
BRACKET 
SLOT
LOUVRE
B
C
LOWER LOUVRES
(VALVE CONTROL DOOR)
HINGE SCREEN:Position the hinge screen into place and with the control door open, secure to the firebox using three screws.
FIGURE 16
A C L I P S
F L A N G E
C E N T R E
S L O T
S L O T
HOOD
Attach the hood by pressing the top flange into the clips along the top of the louvre opening. Secure using a screw through the centre slot.
UPPER LOUVRES
Insert the louvre tabs into the slots located at the top left and right corners of the unit.
B
C
HINGE
C L I P
TA B
S L O T
LOWER LOUVRES
Insert the hinge clips into the slots located at the bottom left and right corners of the unit.
To remove the louvres, pull the back tabs of the clips forward, while pushing the louvre assem- bly back. Lift the clip.
