7
FINISHING
FIBRE FIREBRICK PANELS
To give your insert that authentic masonry fireplace look, optional fibre firebrick panels are available at your Napo- leon / Wolf Steel Ltd. dealer. Complete installation and main- tenance instructions are included with the kit.
LOG PLACEMENT
PHAZERTM logs and charcoal embers, exclusive to Napo- leon Fireplaces, provide a unique and realistic glowing ef- fect that is different in every installation. Take the time to carefully position the charcoal embers for a maximum glow- ing effect.
1.Place the front log onto the main burner, pushing it as close as possible to the burner ports without blocking/covering them. The left and right spacing between the log ends and the burner ports should be equal.
YOU MAY FIND IT EASIER TO PLACE SOME CHARCOAL
EMBERS BENEATH THE FRONT LOG NOW.
CHARCOAL EMBERS
Randomly place the embers beneath the front log, cover- ing all of the burner area beneath the hollowed out section of the log. Place the remaining embers along the front. Keep ember dust away from burner ports to avoid plug- ging them.
Fine dust found in bottom of bag not to be used.
PHAZERTM logs and charcoal embers glow when exposed to direct flame. Use only certified PHAZERTM logs and char- coal embers available from your Napoleon / Wolf Steel Ltd. dealer.
FLUSH LOUVRE KIT, GI-1L
FIGURE6
SIDE VIEW
UPPER
LOUVRE
LOUVRE
CLIP
UPPER LOUVRES
Insert the back edge of the upper louvre into the upper louvre clips.
FIGURE 8
2.Place the back log onto the step located at the back of the combustion chamber. The notch situated at the lower right of the back log should be centered evenly above the pilot assembly.
3.While supporting the back log, to prevent it from falling forward, set the three smaller logs into the pockets and grooves of the front and back logs, respectively.
Log colours may vary. During the initial use of the fireplace, the colours will become more uniform as colour pigments burn in during the heat activated curing process.
POSITIONING THE LOGS IMPROP- ERLY WILL CAUSE FLAME IMPINGE- MENT AND CARBONING.
LOWER LOUVRES
Secure the lower louvre assembly to the insert, using the 4 screws sup- plied.