8
HOOD |
| LOGO PLACEMENT |
|
|
|
FIGURE 12
HOOD
CURTAIN
MESH
Remove the backing of the logo supplied and place on the screen cover, as indicated.
FIGURE 14
LOUVRE INSTALLATION
The curtain mesh must be kept fully closed during operation to help prevent accidental burns from occurring.
FIGURE 13
FIGURE
HOOD
BRACKET
SLOT
ALOUVRE
UPPER LOUVRES: Insert the upper louvres into the slots on both brackets. Press the top flange of the hood into the four clips located along the top of the unit as shown.
LOWER LOUVRES: Attach each hinge to the fire- box with 2 screws.
The heater must not be used when the hood is re- moved. Hook the hood over the lip of the curtain support plate.
BLOWER LOUVRES (VALVE CONTROLDOOR)
HINGE SCREEN
C
HINGE SCREEN: Position the hinge screen into place and with the control door open, secure to the firebox using three screws.