LIGHTING INSTRUCTIONS
308 SERIES | 450 SERIES |
Open lid.
|
|
| RIGHT |
LIGHTING | LEFT | REAR | BURNER |
HOLE |
| ||
BURNER | BURNER |
| |
|
| ||
IGNITER |
|
|
|
Ensuring all burner controls 
are in the off position,
slowly turn on the gas 
supply valve.
REAR
BURNER
LIGHTING |
| RIGHT | |
HOLE |
| ||
LEFT | CENTRE BURNER | ||
IGNITER | |||
BURNER | |||
BURNER | |||
|
Main Burner
Lighting
Turn left burner control to high position.
Press and hold
igniter button until lit, or light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
With left burner
operating on high, turn the centre and/or right burner to high.
Rear Burner
Lighting
Remove
warming rack.
Turn rear burner
control to high
position.
Press and hold
igniter button until lit, or light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
Side Burner
Lighting
(optional)
Open burner
cover.
Turn side
burner control
to high position.
Turn igniter
knob clockwise several times or light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
6
The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
Do not use back burner while operating main burner.
