LIGHTING INSTRUCTIONS
Open lid.
Ensuring burner controls are in the off position, turn on the gas supply valve.
IGNITER |
|
|
|
| |
|
|
|
| LIGHTING PORT | |
|
|
|
| HOLE | |
LEFT | CENTER |
|
| (BOTH SIDES) | |
TUBE | REAR | RIGHT | MAIN | ||
TUBE | |||||
BURNER | BURNER | BURNER | TUBE | INFRARED | |
|
|
| BURNER | BURNER |
Main Tube
Burner Lighting
Turn left burner control to high position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
With left burner
operating on high,
turn the centre,
and/or right burner
to high.
Main Infrared
Burner Lighting
Turn infrared
burner control to
high position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
Back Burner
Lighting
Remove warming
rack.
Turn back burner
control to high
position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
Side Burner
Lighting
(optional)
Open burner
cover.
Turn side burner
control to high
position.
Turn igniter knob
clockwise
several times, or
light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
6
The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
Do not use back burner while operating main burner.
