CAUTION : Avoid inhaling fumes emitted from the heater's First use.Smoke and odor from the burning of oils used in manufacturing will appear.Both smoke and odor will dissipate after approximately 30 minutes. The heater should NOT produce thick black smoke.
NOTE:
The burner may be noisy when initially turned on. To eliminate excessive noise from the burner,turn the Control Knob to the "LOWO " position. Then, turn the knob to the level of heater desired.
When heater is ON:
Emitter screen will become bright red due to intense heat. The color is more visible at night.Burner will display tongues of blue flame.These flames should not be yellow or produce thick black smoke,indicating an obstruction of airflow through the burners.
RELIGHT
1)Turn the control knob to "OFFO W " position.
2)Wait five (5) minutes before attempting to relight pilot.
3) Repeat steps beginning with step 2 of the Lighting Instruction above.
SHUT DOWN INSTRUCTIONS
1)Push in and turn control knob clockwise to "OFF" position.
2)Turn L.P. tank gas valve clockwise to "OFF" position when heater is not in use
Note: After use, some discoloration of the emitter screen is normal.
WARNING :Heater will be hot after use.
Handle with extreme care.
OPERATION
OFF
|
| P |
|
|
| u | |
|
| T |
|
| O | s | |
L |
|
| h |
|
| o | |
I |
|
| t |
P |
|
| t |
|
|
| u |
|
|
| r |
|
|
| n |
O | H |
L |
|
W | IG |
| H |
2"
1"
0"
OFF
|
| P |
|
|
| u | |
|
| T |
|
| O | s | |
L |
|
| h |
|
| o | |
I |
|
| t |
P |
|
| t |
|
|
| u |
|
|
| r |
|
|
| n |
O | H |
L |
|
W | IG |
| H |
11
