C Maintenance
General
The Model 8718B requires very little maintenance. No operator adjustments are required. The electronic circuitry is contained in a very rugged aluminum housing. However, this housing is not watertight and should not be immersed in water. The LCD display and the case may be cleaned using a damp cloth. Do not use any type of detergent or solvent.
Calibration
The Model 8718B is calibrated before it is shipped. Narda recommends that the Model 8718B be calibrated every two years. Narda will perform this calibration for a nominal charge. The meter is completely tested using Automated Test Equipment (ATE) as part of the calibration service.
Replacement Parts
None of the parts within the meter are considered user serviceable. The table below contains the model numbers and part numbers of the accessories supplied with the 8718B and available as optional accessories.
Appendix C Maintenance | 129 |