NG7010B
6 Description
1.Memory card slot
2. | Power adapter jack | 1 |
3.Frame stand
4. | 2 |
5.Previous
6. | Next | 3 |
7. | Rotate |
|
8.Playback Mode
4 5 6 7 8
7 Installation
7.1Desktop placement
Install the enclosed stand 3 | at the back of the digital photo frame (horizontal or vertical). | |
Horizontal | Vertical | Wall mounting hook |
7.2Wall mounting
•Drill holes, fit wall plugs and screw in screws.
•Mount the photo frame with the wall mounting hook (illustrated above) on the screw.
7.3Power adapter connector
Only use the power adapter supplied (DC 12V, 500mA). Do not use other adapters, as this may damage the device.
The wall outlet for the power supply must be close and easy accessible.
•Connect the small plug of the AC adaptor to the photo frame adapter Jack 2 and the other end of the adapter cable to the electric socket (230V/50Hz).
8 Plugging in Memory Card
Your digital photo frame can work with these memory cards:
–Secure Digital
–Multi Media
–Xtreme Digital
–Memory StickTM & Memory Stick ProTM
Insert the memory card into the slot 
on the digital photo frame. Be sure that the memory card is in the right direction.
Note: Be sure that your photo frame is shut down when pluggin in and out a memory card. Only pictures in JPEG format can be displayed in your digital photo frame.
9 Displaying Photos
After plugging in your memory card and plugging in the
• Press and hold the 
4 for 3 seconds to turn off the photo frame.
•Press and hold the 
4 for 3 seconds again to turn the photo frame on again. The slide
| show will start automatically. |
|
|
|
|
|
|
| ||
• | Press the |
|
|
|
|
| 4 | to pause the slide show. | ||
|
| |||||||||
• | Press the |
|
|
|
|
| 4 | to | ||
|
| |||||||||
• | Press the Previous button |
|
|
| 5 to display the previous photo. | |||||
• | Press the Next button | 6 |
| to display the next photo. | ||||||
• | Press the Rotate button |
| 7 | to adjust the slide show interval (5 / 15 / 30 sec. or 1 / 5 / 15 / 30 / 45 / 60 min). | ||||||
ENGLISH
3
