Appendix A Errors and Warnings
©
National Instruments Corporation A-7 LabWindows/CVI Programmer Reference Manual
Bad OMF record at
position NUMBER: OMF
record type NAME.
PC/Windows
Load Error OMF object file contains an unknown object
record. Make sure that the object file is OMF
and conforms to the 32-bit format
LabWindows/CVI supports.
Bad relocation record
encountered while
reading external module:
FILE.
Link Error Object module is corrupted or is of a type
that you cannot load into LabWindows/CVI.
Bad OMF record at
position NUMBER: OMF
record type NAME.
PC/Windows
Load Error OMF object file contains an unknown object
record. Make sure that the object file is OMF
and conforms to the 32-bit format
LabWindows/CVI supports.
Byte ordering is
invalid. Non-Fatal
Run-time Error Byte ordering that the omodifier specifies is
not valid for the size of the integer. The
number of digits following theomust match
the size of the integer, and the digits must fall
in the range zero to size ofthe integer–1.
c modifier valid only
with l format specifier. Non-Fatal
Run-time Error c modifier is only valid for the l format
specifier.
The callback function,
NAME, specified in the
UIR file, does not have
required prototype.
Non-Fatal
Run-time Error You specified the
NAME
function as a
callback function for an item in a user
interface resource file, but it does not have
the correct type to be a callback function.
Callback functions must have one of the
callback types specified in the user interface
library header. The function will not be
called.
The callback function,
NAME, specified in the
UIR file, is not a known
function.
Non-Fatal
Run-time Error You specified the
NAME
function as a
callback function for an item in a user
interface resource file, but the function does
not exist.
Table A-1. Error Messages (Continued)
Error Message Type E rror Comment
00ProRef.book : 07AppA.fm Page 7 Monday, March 9, 1998 3:23 PM