Chapter 3 Lookout Runtime Menu Commands
© National Instruments Corporation 3-7 Lookout Operator’s Manual
Options»Serial Ports
Security Level: 9
Shortcut Keys: none
Use the Options»Serial Ports command to configure your computer serial
port communication topology. Each serial port can have a unique setting:
Hardwired, Dial-up, or Radio (RTS/CTS). Configure your serial port
using the following instructions.
Figure 3-1. Serial Port Settings Dialog Box
1. In the Serial port data field, select the communication port you are
defining (in this example, COM1).
2. Define the serial port parameters for the appropriate communication
port. Refer to the remaining sections in this chapter for complete
descriptions of the parameters.
3. Click on Accept to save the parameter changes for the serial port.
4. Click on Quit to exit the dialog box.