Appendix D Front Panel and Connectors
© National Instruments Corporation D-5 VXIpc 800 Series User Manual
Ethernet
Figure D-4 shows the location and pinouts for the Ethe rnet connector
on the VXIpc-800. Table D-3 gives the name and description for the
Ethernet connector signals.
Amp manufactures a mating connector, part number 554739-1.
Figure D-4. Ethernet Connector Location and Pinout
9+5 VDC +5 VDC
10 GND Ground
11 NC Not Connected
12 SD Serial Data
13 HSync Horizontal Sync
14 VSync Vertical Sync
15 SC Serial Clock
Table D-2. VGA Connector Signals (Continued)
Pin Signal Name Signal Description
Ethernet
2
18
1