Appendix D Front Panel and Connectors
VXIpc 800 Series User Manual D-6 © National Instruments Corporation
COM1 and COM2
Figure D-5 shows the location and pinouts for the COM1 and COM2
connectors on the VXIpc 800. TableD-4 gives the name and description
for the COM1 and COM2 connector signals.
ITT Cannon manufactures a serial port mating connector, part number
MDSM-9SC-Z11, for the COM1 and COM2 connectors on the
VXIpc-800.
Table D-3. Ethernet Connector Signals
Pin Signal Description
1Differential Transmit
2Differential Transmit
3Differential Receive
4NC
5NC
6Differential Receive
7NC
8NC