National Instruments FP-3000

b. Slide the FP-3000 to the desired position along the

DIN rail.

c. Lock the rail clip.

• Installing onto a panel mount accessory, which you can

order separately from National Instruments:

a. Snap the panel mount accessory onto the module

asshown in Figure 3.

Figure 3. Mounting the FP-3000 onto a Panel Mount Accessory

b. Lock the rail clip.

c. Mount the FP-3000 and panel mount accessory onto

the desired surface. You can drill pilot holes using the

directions in the FieldPoint Network Module Panel

Mount Accessory installation guide.

3. Add terminal bases with their local bus connectors firmly

mated to the FP-3000 local bus connector.

4. Place the protective cover over the local bus connector of the

last terminal base in the bank. Figure4 shows an installed

FP-3000 network module on a DIN rail.

Press