National Instruments NI 9233

share a single master timebase source. Refer to the software help

for information about configuring the master timebase source for

the NI9233. Visit ni.com/info and enter cseriesdoc for

information about CSeries documentation.

The following equations provide the available data rates of the

NI9233:

When fs is ≤ 25.65 kS/s, fs =

where n is any integer from 2 to 25.

When fs is > 25.65 kS/s, fs =

where n is any integer from 2 to 3.

However, the data rate must remain within the appropriate data rate

range. Refer to the Specifications section for more information

about the data rate range. When using the internal master timebase

of 12.8 MHz, the result is data rates of 50 kS/s, 33.33 kS/s, 25 kS/s,

and so on down to 2.0 kS/s, depending on the value of n. When

using an external timebase with a frequency other than 12.8MHz,

the NI9233 has a different set of data rates.

M256÷

---------------------

M128÷

---------------------