National Instruments NI sbRIO-960x dimensions

USER GUIDE

NI sbRIO-960x

Single-Board RIO OEM Devices

This document provides dimensions, pinouts, connectivity information,

and specifications for the National Instruments sbRIO-9601 and

sbRIO-9602. The devices are referred to inclusively in this document as

the sbRIO-960x.

Caution National Instruments makes no product safety, electromagnetic compatibility

(EMC), or CE marking compliance claims for the sbRIO-960x. The end-product supplier

is responsible for conformity to any and all compliance requirements.

Caution Exercise caution when placing the sbRIO-960x inside an enclosure. Auxiliary

cooling may be necessary to keep the device under the maximum ambient temperature

rating of 55 °C.

The following figure shows the sbRIO-960x.

Figure 1. sbRIO-960x

Contents

Main USER GUIDE NI sbRIO-960x Single-Board RIO OEM Devices What You Need to Get Started Software Requirements Hardware Requirements Page NI sbRIO-960x 4 ni.com The following figure shows the dimensions of the sbRIO-960x. Figure 2. sbRIO-960x Dimensions in Inches (Millimeters) Page I/O and Other Connectors on the sbRIO Device The following figure shows the locations of parts on the sbRIO device. Figure 4. sbRIO-960x Parts Locator Diagram Page The following figures show the pinouts of the I/O connectors on the sbRIO devices. Figure 5. Pinout of I/O Connector P2, 3.3 V Digital I/O Figure 6. Pinout of I/O Connector P3, 3.3 V Digital I/O Figure 7. Pinout of I/O Connector P4, 3.3 V Digital I/O Figure 8. Pinout of I/O Connector P5, 3.3 V Digital I/O The following figure and table show the signals on J1, the RS-232 serial port. Figure 9. J1, RS-232 Serial Port Connecting the sbRIO Device to a Network Powering the sbRIO Device Powering On the sbRIO Device Boot Options Connecting Serial Devices to the sbRIO Device Using the Internal Real-Time Clock Configuring DIP Switches SAFE MODE Switch CONSOLE OUT Switch IP RESET Switch NO APP Switch USER1 Switch NO FPGA Switch Using the Reset Button Understanding LED Indications FPGA LED USER LED POWER LED Resetting the Network Configuration of the sbRIO Device Integrated 3.3 V Digital I/O I/O Protection Drive Strength Signal Integrity Using +5 V Power from 3.3 V DIO Headers P2P5 Specifications Network Processor Speed Memory Xilinx Spartan 3 Reconfigurable FPGA 3.3 V Digital I/O Resistance-temperature characteristics, typical curve Power Requirements Working I/O Voltages Environmental Management Waste Electrical and Electronic Equipment (WEEE) Environmental RoHS Cabling Where to Go for Support