National Instruments NI 5670, NI 5671, NI 5672, RF Signal Generator PXI Express Modules

NI RF Signal Generators Getting Started Guide 10 ni.com

Install the NI 5610 RF upconverter module by completing

steps 1 through 11 under the Installing PXI Modules section.

After completing all the steps, continue with the procedure

in the Installing the NI 5421/5441 AWG Module section.

Install the NI 5421/5441 AWG module by completing steps 1 though 11

in the Installing PXI Modules section.

After completing all the steps, continue with the procedure in section 6.

Interconnecting the NI 5670/5671/5672 Modules.

Install the NI 5650/5651/5652 by completing steps 1 though 11

in the Installing PXI Modules section.

After completing all the steps, continue with the procedure in the

Configuring the NI 5650/5651/5652 in MAX section.

PXI Express Modules

NI PXI Express (PXIe) modules are sensitive instruments that should be

handled carefully. Do not expose the module to temperatures or humidity

beyond the rated maximums. Keep the module free of dust by cleaning with

compressed air only. Do not clean the module with any solvents or liquids.

Refer to the Cooling section for more information about module cooling.

You can install PXI Express modules in any PXI hybrid slot marked with a

peripheral slot compatibility glyph (the letter “H” and a solid circle

containing the slot number).

You can also install PXIe modules in any PXIe slot marked with a with a

peripheral slot compatibility glyph (a solid circle containing the slot

number).

Follow the installation instructions in the Installing PXI Modules section to

install the PXI Express module in a PXI Express-compatible slot of the

chassis. Refer to the chassis documentation for more information about

which slots are designated for PXI Express modules.