National Instruments NI 5670, NI 5671, NI 5672, RF Signal Generator 3. Verifying Kit Contents

appears damaged in any way. Do not install a damaged module into

the system.

3. Verifying Kit Contents

Verify that the kit contains the following items required to set up and use

the NI RF signal generator:

❑CDs, which install the following software components:

–NI-RFSG instrument driver, including NI-RFSG examples

– Hardware and software electronic documentation:

•NI RF Signal Generators Help (online help)

•NI RF Signal Generators Getting Started Guide (PDF)

• Specifications documents for your device (PDF)

• Hardware user manual for your device (PDF)

❑Printed documents:

– The specifications document for your NI RF signal generator

–NI RF Signal Generators Getting Started Guide (this document)

– Read Me First: Safety and Radio-Frequency Interference

– Maintain Forced-Air Cooling Note to Users

❑Either an NI 5670/5671/5672 or NI 5650/5651/5652 device. The

components required for installing each device are described in

Tables1 and 2, respect ively. All the components listed should be

included in the kit unless otherwise noted.

Table 1. NI 5670/5671/5672 Required Parts Inventory and Replacement Part Numbers

Hardware Component Replacement Part Number

Two hardware modules:

• NI 5610 wideband RF upconverter module

• NI 5421, NI 5441, or NI 5442 AWG module

778737-01

778697-0X1(NI PXI-5421);

779058-0X1 (NI PXI-5441);

779990-0X1 (NI PXIe-5442)

Two semi-flexible SMA-to-SMB coaxial cables 190846A-01

1/8-in. combination Phillips/flathead screwdriver 772006-01

Plastic collars (cable wrenches) for gripping the

coaxial cable hex connectors

746016-01