© National Instruments Corporation 1-1 SCB-68 Shielded Connector Block User Manual
1
Introduction
The SCB-68 is a shielded I/O connector block with 68 screw terminals for
easy signal connection to a National Instruments 68- or 100-pin DAQ
device. The SCB-68 features a general breadboard area for custom circuitry
and sockets for interchanging electrical components. These sockets or
component pads allow RC filtering, 4 to 20 mA current sensing, open
thermocouple detection, and voltage attenuation. The open component
pads allow signal conditioning to be easily added to the analog input (AI)
signals and to the DAC0OUT, DAC1OUT, and PFI0/TRIG1 signals of a
68-pin or 100-pin DAQ device.

What You Need to Get Started

To set up and use the SCB-68, you need the following items:
❑SCB-68 68-pin shielded connector block
❑One of the devices listed in Table1-1
❑One of the device-compatible cables listed in Table1-1
❑The device user manual or user guide, which you can access at
ni.com/manuals
❑Phillips number 1 and number 2 screwdrivers
❑0.125 in. flathead screwdriver
❑Long-nose pliers
❑Wire cutters
❑Wire insulation strippers
❑Quick reference label for the DAQ device you are using