© National Instruments Corporation B-1 SCXI-1141/1142/1143 User Manual
B

Removing the

SCXI-1141/1142/1143 Module

This appendix describes how to remove the SCXI-1141/1142/1143 module
from an SCXI chassis and from MAX.

Removing the SCXI-1141/1142/1143 Module from MAX

To remove a module from MAX, complete the following steps after
launching MAX:
1. Expand Devices and Interfaces to display the list of installed devices
and interfaces.
2. Expand NI-DAQmx Devices to display the chassis.
3. Expand the appropriate chassis to display the installed modules.
4. Right-click the module or chassis you want to delete and click Delete.
5. You are presented with a confirmation window. Click Yes to continue
deleting the module or chassis or No to cancel this action.
Note Deleting the SCXI chassis deletes all modules in the chassis. All configuration
information for these modules is also deleted.
The SCXI chassis and/or SCXI module(s) should now be removed from the
list of installed devices in MAX.

Removing the SCXI-1141/1142/1143 Module from an

SCXI Chassis

Consult the documentation for the chassis and accessories for additional
instructions and precautions. To remove the SCXI-1141/1142/1143 module
from a chassis, complete the following steps while referring to Figure B-1:
1. Power off the chassis. Do not remove the SCXI-1141/1142/1143
module from a chassis that is powered on.