National Instruments VXI-SC-1102 Optional Equipment

Chapter 1 Introduction
VXI-SC-1102/B/C User Manual 1-6
© National Instruments Corporation
VXI plug&play Instrument Driver
National Instruments distributes VXIplug&play instrument drivers free
of charge. VXIplug&play instrument drivers are one level above the
NI-DAQ device driver and contai n high-level software functions whose
architecture is specified by the VXIplug&play Systems Alliance. The
VXIplug&play standards increase interoperability with other vendors,
and ensure that drivers are designed and presented in a consistent
fashion that facilitates ease of use. R efer to Figure 1-2 to see the
relationship between your VXI-DAQ hardware and your software.
Figure 1-2. The Relationship between the Programming Environment,
Your Instrument Driver, and Your VXI-DAQ Hardware
Optional Equipment
National Instruments offers a variety of products to use with your
VXI-SC-1102/B/C submodule, as follows:
• Terminal blocks and 96-pin cables that allow you to attach input
signals to your submodule
• SCXI Process Current Resistor Kit
For more specific information about these products, refer to your
National Instruments catalogue or ca ll the office nearest you.
ComponentWorks,
LabVIEW, LabWindows/CVI,
or VirtualBench
VXI
plug&play
Instrument Driver
NI-DAQ Driver Software
VISA
VXI-DAQ Hardware
Other Application
Development Environments