© National Instruments Corporation 3-1 Getting Started with Your VXIpc-850
Default Settings
Chapter
3
This chapter summarizes the hardware and software default settings for
the VXIpc-850 kit. If you need more information about a particular
setting or if you want to try a different configuration, refer to the user
manuals in your kit.
Refer to the VXIpc-850 Series User Manual for more detailed
information about the hardware default settings and options. The
NI-VXI Software Manual for the VXIpc-850 Series contains more
details about the NI-VXI software default settings and options.
Table 3-1. VXIpc-850 Hardware Default Settings
Hardware Component Default Setting
S1—Ethernet EEPROM Enabled. Do not alter this
setting.
S2—POSC Enabled. Do not alter this
setting.
S3—CLK10 Source Source from onboard oscillator
S4—CLK10 SMB Polarity Not inverted
S5—CLK10 SMB Direction Receive CLK10
S6—CLK10 SMB Termination Do not terminate
S7—TrigIn SMB Termination Do not terminate
S8—GPIB Circuitry Interrupt Level 11
(continues)