Figure 5. Access Point LEDs
General | Color | Function |
PWR | Green | Unlit: Power OFF |
(Power/Status) |
| Blinking: Diagnostic test |
|
| On: Healthy condition |
| Red | On: Abnormal Condition |
|
|
|
E/N(Ethernet) | Color | Function |
Link | Green | Indicates an Ethernet link. If the |
|
| radio fails, this LED will not light |
TX/RX | Orange | Blinks to indicate Ethernet |
|
| transmission/reception activity |
RF | Color |
| Function |
Link | Green |
| Indicates a wireless link. If the radio |
|
|
| fails, this LED will not light |
TX/RX | Orange |
| Blinks to indicate radio transmission/ |
|
|
| reception activity |
|
| Figure 6. LED Functions | |
AP Management Software Installation/Uninstallation
Installation
step1. Insert the InstantWave High Rate setup disk 1into drive A: step2. From the Start menu select Run, and type A:\SETUP.EXE step3. Click the Next button to start the setup program
10InstantWave High Rate Access Point
