Here you may:
AP Alias Name
Assign the AP a unique name
Domain Name (ESSID)
This is more commonly called the
Domain Name but is defined in the
802.11 Wireless Standard as ESSID.
Stations and AP(s) in the same group
must use the same Domain Name
Transmission Rate The transmission rate at which the
data packets are transmitted by the
AP. Click Down selector arrows,
found to the right of Transmit Rate
to select which rate you want to use
Basic Rates This value determines the basic rates
used and reported for this BSS by
the AP. The highest rate specified
will be the rate that the AP will use
when transmitting broadcast /
multicast and management frames.
Available options are:
• 1 and 2 Mbps
All (1, 2, 5.5, and 11 Mbps)
Channel Number You can change the channel number.
Channels supported on every carrier
set as below table
Regulatory Domain Identify the country where the AP is
used (see Glossary, page 2).
Read-only
BSS ID Read-only
Firmware Version Read-only
14 InstantWave High Rate Access Point