NAP- 200-003

Sheet 1/29

Installation of Main Equipment

1. Installation of Modules

Install modules according to the installation procedures for Floor Standing, Wall-Mounting or 19-Inch Rack Mounting installation.

1.1Installation of the BATTM and MDFM

Due to weight considerations, it is p referable to Floor-mount the BATTM.

Always mount the MDF on the wall, at a minimum height of 300mm, in order to comply with AUSTEL Regulations.

Refer to Figures 006-1 and 006-2 for cable routing options, and Figures 003-11 to 003-21 for the preferred modular layouts.

Notes: 1. In all cases, the RACK and BASE parts are to be used, as shown in Figures 2-2 to 2-5.

2.Where the battery and MDF cables pass through a bulkhead, the grommet strip provided must be added to the aperture, to protect the insulation.

3.For details of internal cabling for the batteries, see NAP-200-005.

4.The modular layouts shown are based on the use of ribbon-type LT cables, which terminate on a connectorised 100-pair Krone block. Standard 10-way disconnect-modules are used for the MDF jumpers.

CABLE HOLE

FRONT

 

RACK PARTS

430

 

214

 

30

184

UNIT: mm

Figure 003-1 Location of the Cable Holes

AD-25182501CHAPTER 3

Page 19

Revision 1.0.1

Page 33
Image 33
NEC 120 manual NAP Sheet 1/29 Installation of Main Equipment, Installation of Modules, Installation of the Battm and Mdfm

120 specifications

The NEC 120 is a well-regarded platform that exemplifies cutting-edge technology and performance in its category. Designed primarily for high-performance computing and telecommunications applications, the NEC 120 has become a staple in many industries, providing robust solutions for demanding workloads.

One of the standout features of the NEC 120 is its microwave technology, which utilizes advanced signal processing capabilities. This system enhances the efficiency of data transmission, reducing latency and boosting overall communication performance. The NEC 120's ability to handle high-frequency signals makes it especially valuable in environments that require rapid data processing, such as mobile networks and internet service providers.

In terms of hardware, the NEC 120 is powered by a multi-core processor architecture, enabling parallel processing that significantly improves computational speed. This feature is essential for applications that handle complex calculations and large volumes of data simultaneously. Additionally, the architecture is complemented by a high-capacity memory system that supports extensive data storage and retrieval, catering to the needs of enterprise-level applications.

Another notable characteristic of the NEC 120 is its modular design. This allows for customization and scalability, making it easy for organizations to adapt the system to their specific requirements. Whether a company needs to expand its capabilities or integrate new technologies, the NEC 120 can be updated without complete system overhauls, thus maintaining cost-effectiveness.

The NEC 120 also excels in its energy efficiency, which is critical in today’s environmentally conscious technology landscape. By minimizing power consumption while maximizing performance, the platform not only reduces operational costs but also aligns with sustainable practices.

Security is an increasingly important aspect of technology, and the NEC 120 addresses this with robust security features to protect data integrity and privacy. This includes advanced encryption methods and secure access protocols, ensuring that sensitive information is safeguarded from breaches.

Overall, the NEC 120 stands as a testament to NEC Corporation's commitment to delivering innovative and reliable technology solutions. With its emphasis on performance, scalability, and security, the NEC 120 is well-suited for a wide range of applications, from telecommunications to enterprise computing, making it a valuable asset for organizations aiming for technological advancement.