NEC 128 manual Operating Modes & Features, VisuaLink Unit Control, Call Dialing Originating Modes

Specifications 5-7

Operating Modes & Features

The following provides a summary of the main operating modes and features for VisuaLink.

VisuaLink Unit Control

VisuaLink can be controlled by one of three devices:

•VisuaLink Wireless Infrared Remote Control

•VoicePoint+ or Analog Phone Set (connected to TEL jack)

•Personal Computer (connected to Serial Port)

A buzzer is built into VisuaLink, and will sound when an incoming call is detected. When using a VoicePoint+ or analog phone, their respective ringers will indicate an incoming call.

Call Dialing (Originating) Modes

•Direct dial calling (by the Remote Control, PC control, analog telephone, and VoicePoint+)

•Speed-Dial calling (by the Remote Control, PC control)

•Redial calling (by the Remote Control, PC control)

VisuaLink provides 130 speed dial number address book for call originating For redial, 30 numbers are automatically saved for both incoming and outgoing calls.

VisuaLink can be set to only originate a call and can reject the originating call that does not meet the specific condition. (Originating number filter feature) Example conditions are:

•Incoming call only

•Inhibits originating a call to the number other than the registered abbreviated dial numbers,

•Inhibits originating a call to special number (for example, the number starting from 001).

Incoming Call Answer Modes

•Manual

•Automatic

•Selective

Selective is a security mode, and will automatically reject an incoming call from phone numbers other than those in the abbreviated dial list.)

VisuaLink 128/384 General Description