Copying Procedure

Document Glass

The following explains how to load a document using the document glass.

The document glass is used for a single-page or bound document up to 297 mm (11.7 inches) for the width and up to 432 mm (17 inches) for the length.

NOTE: Before you place a document on the document glass, make sure that the touch screen is ready. If you place the document on the document glass before the touch screen is ready, the paper size may not be detected correctly.

1.Raise the document feeder or the document glass cover.

2.Place the document face down

on the document glass, aligned with the tip of the registration arrow near the top left of the document glass.

CAUTION

Do not apply excessive force when placing a thick document on the document glass.

3.Lower the document feeder or the document glass cover.

2.Select the Features

NOTE: The features displayed on the copy screens vary depending on your machine configuration.

1.Press the <All Services> button on the control panel.

<All Services> button

<Clear All> button

47

Page 47
Image 47
Xerox 5230 manual Select the Features, Document Glass