Output Format

Side 2 Options

Allows you to specify the position of the date, page numbers, and comments on Side 2 to [Same as Side 1] or [Mirror Side 1].

Watermark

This feature allows you to add a watermark beneath the original image of the copy output. Information such as a control number, predetermined text, date and time, and the machine serial number can be added.

1.Select [Watermark] on the [Output Format] screen.

2.Select the required option.

3.Select [Save].

Control Number

Displays the [Watermark - Control Number] screen. This option prints sequential control numbers on each copy set. The following options are available:

Off - Disables the feature.

On - Enables the feature. Specify a start number between 1 and 999 using the scroll buttons. You can also enter the number by touching the text box and using the numeric keypad on the control panel.

Stored Watermarks

Displays the [Stored Watermarks] screen. This option prints a predetermined phrase on the output copies. The following options are available:

Off - Disables the feature.

On - Enables the feature. Select from the predetermined phrases set up by the System Administrator.

User Account Number

Prints your account number on the copies.

NOTE: This feature is displayed only when the Authentication feature is enabled.

Off - Disables the feature.

On - Enables the feature.

Date & Time

Displays the [Watermark - Date & Time] screen. This option prints the date and time on each of the output copies. Select [On] to enable the feature.

Machine Serial Number

Displays the [Watermark - Machine Serial Number] screen. This option prints the serial number of the machine on the output copies. Select [On] to enable the feature.

Watermark Effect

Displays the [Watermark Effect] screen. This option embeds the text strings specified in [Control Number], [Stored Watermarks], [User Account Number], [Date & Time], and [Machine Serial Number] on the entire sheet of your output copies. If you make copies

71

Page 71
Image 71
Xerox 5230 manual Watermark