
Copy
Paper Supply
Displays the [Paper Supply] screen. Select a paper tray for your copy job.
Staple
Allows you to specify the staple position.
•No Staple - Disables the feature.
•1 Staple - Attaches one staple to the top left corner of the output.
•2 Staples (Left) - Attaches two staples along the left edge of the output.
•2 Staples (Top) - Attaches two staples along the top edge of the output.
NOTE: When the Integrated Office Finisher is installed, or when a finisher is not installed, the [2 Staples (Left)] and [2 Staples (Top)] options are not available.
Hole Punch
Allows you to specify the
NOTE: When the Integrated Office Finisher is installed, or when a finisher is not installed, the [Hole Punch] options are not available.
•No Punch - Disables the feature.
•2 Hole Punch - Punches two holes in the left edge of the output.
•3 Hole Punch - Punches three holes in the left edge of the output.
•Top - Selecting [2 Hole Punch] or [3 Hole Punch] and this check box punches two holes or three holes in the top edge of the output.
NOTE: The above Hole Punch options are displayed when the 2 & 3 Hole Punch Unit is installed. When the 2 & 4 Punch Unit is installed, the options available are [No Punch], [2 Hole Punch], [4 Hole Punch], and [Top]. When the 4 Hole Punch Unit is installed, the options available are [No Punch], [4 Hole Punch], and [Top].
Collation
•Collated - Delivers the specified number of copy sets in the same order as the documents. For example,
two copies of a
•Uncollated - Delivers the copies in stacks based on the number of copies required for each document.
For example, two copies of a
55