3 Copy

Copy Booklet

Allows you to copy booklet sheets by maintaining the order of the images. The [Fold and Staple] option binds the copies to create the same type of booklet as the original one.

Binding Shift

Displays the [Booklet Creation - Binding Shift] screen. For more information, refer to [Booklet Creation - Binding Shift] Screen on page 64.

Covers

Displays the [Booklet Creation - Covers] screen. For more information, refer to [Booklet Creation - Covers] Screen on page 64.

Divide Output

Displays the [Booklet Creation - Divide Output] screen. For more information, refer to [Booklet Creation - Divide Output] Screen on page 65.

Fold & Staple

Displays the [Booklet Creation - Fold & Staple] screen. For more information, refer to [Booklet Creation - Fold & Staple] Screen on page 65.

Output Destination

Displays the [Output Destination] screen. Select an output tray for your copy job.

Last Page on Back Cover

Uses the last page of the original document as the back cover of the booklet. When using [Divide Output] to separate booklets, the cover will be the last page of the last subset.

[Booklet Creation - Binding Shift] Screen

Allows you to specify the amount of inside margin in 1 mm (0.04 inch) increments between 0 to 50 mm (0.0-2.0 inches) using the scroll buttons on the screen or the numeric keypad on the control panel.

[Booklet Creation - Covers] Screen

Allows you to add a cover sheet to the booklet. When the output is folded in half to make a booklet, the cover will be on both the front and back.

Off

Makes a booklet without a cover sheet.

On

Adds a cover sheet to the booklet from the cover stock tray. When selected, the [Covers] option becomes available.

64

Page 64
Image 64
Xerox 5230 manual Booklet Creation Binding Shift Screen, Booklet Creation Covers Screen