Job Assembly

Job Assembly

This section describes the job assembly features. For more information on the features, refer to the following:

Build Job – page 73

Sample Job – page 75

Combine Original Sets – page 75

Form Overlay – page 76

Delete Outside/Delete Inside – page 76

1.Press the <All Services> button on the control panel.

2.Select [Copy] on the touch screen.

3.Select the [Job Assembly] tab.

4.Set the required options.

5.Select [Save].

Build Job

This feature allows you to merge individual job sets with different features programmed. For example, if a job consists of some sections with text and some with photos, you can select the appropriate settings to be applied to each section, and then print them at one time.

NOTE: This feature is available only when [Collated] is selected in [Copy Output].

NOTE: Use the side bar to switch between screens.

1.Select [Build Job] on the [Job Assembly] screen.

2.Select the required options. Use the side tabs to switch between screens.

3.Select [Save].

Off

Disables the feature.

On

Enables the feature. Allows you to select the output features that will be applied to the entire job.

Copy Output

Displays the [Copy Output] screen for the build job. For more information, refer to [Copy Output] Screen on page 54.

73

Page 73
Image 73
Xerox 5230 manual Job Assembly, Build Job, Copy Output