1 Before Using the Machine
Laser Safety Information
CAUTION: Use of controls, adjustments, or performance of procedures other than those specified in this guide may result in hazardous light exposure.
This equipment complies with international safety standards and is classified as a Class 1 Laser Product.
With specific reference to lasers, the equipment complies with laser product performance standards set by governmental, national, and international agencies as a Class 1 Laser Product. It does not emit hazardous light, as the beam is totally enclosed during all phases of customer operation and maintenance.
Ozone Information
This product produces ozone during normal operation. The ozone produced is heavier than air and is dependent on copy volume. Install the system in a
If you need additional information about ozone, please request the Xerox publication Facts About Ozone (part number 610P64653) by calling
For Consumables
•Store all consumables in accordance with the instructions given on the package or container.
•Use a broom or a wet cloth to wipe off spilled toner. Never use a vacuum cleaner for the spills.
•Keep the drum and toner cartridges out of the reach of children. If a child accidentally swallows toner, spit it out, rinse mouth with water, drink water and consult a physician immediately.
•When replacing the drum and toner cartridges, be careful not to spill the toner. In case of any toner spills, avoid contact with clothes, skin, eyes and mouth as well as inhalation.
•If toner spills onto your skin or clothing, wash it off with soap and water.
•If you get toner particles in your eyes, wash it out with plenty of water for at least 15 minutes until irritation is gone. Consult a physician if necessary.
•If you inhale toner particles, move to a fresh air location and rinse your mouth with water.
•If you swallow toner, spit it out, rinse your mouth with water, drink plenty of water and consult a physician immediately.
•Always use materials and supplies specifically designed for this product. Use of unsuitable materials may result in poor performance.
16
