Copy

5.Check the Status of the Copy Job

1.Press the <Job Status> button on the control panel to display the [Active Jobs] tab.

The queued copy job is displayed. If the job is not displayed, it may have already been processed.

For more information, refer to the Job Status chapter in the System Administration Guide.

Stopping a Copy Job

Follow the steps below to manually cancel an activated copy job.

1.Press the <Stop> button on the control panel to suspend the current copy job.

2.If required, press the <Job Status> button to display the [Active Jobs] tab. To exit the [Active Jobs] tab, press the <Features> button.

<Stop> button

3.On the [Stop/Pause] screen

displayed, select [Cancel] to delete the suspended copy job.

NOTE: To resume the job, select [Resume] on the [Stop/Pause] screen.

Copy

This section describes the features on the [Copy] screen. For information on the features available, refer to the following:

Reduce/Enlarge – page 50 Paper Supply – page 51

2 Sided Copying – page 52 Copy Output – page 53

1.Press the <All Services> button on the control panel.

2.Select [Copy] on the touch screen.

3.Set the required feature.

4.Select [Save].

49

Page 49
Image 49
Xerox 5230 manual Check the Status of the Copy Job, Stopping a Copy Job