Layout Adjustment

Binding Edge Erase

Erases printing of the center binding area of the book that tends to be shadowed due to the fold in the pages. Use the scroll buttons to specify the area to be erased from the center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1 mm (0.04 inch) increments.

2 Sided Book Copying

This feature allows you to make double-sided copies in the same order and image layout as the original bound document, using the document glass. A blank sheet is automatically inserted as the first page.

1.Select [2 Sided Book Copying] on the [Layout Adjustment] screen.

2.Select the required options.

3.Select [Save].

NOTE: This feature and the [Book Copying] or [Build Job] feature cannot be activated simultaneously.

Off

Disables the feature.

Left Page then Right

Copies both pages of an open book in the direction from left to right.

Start & End Pages

Displays the [Starting & Ending Pages] screen where you can specify the start page and the end page for copying. The specified page sides must be identified using the bound original.

Binding Edge Erase

Erases printing of the center binding area of the book that tends to be shadowed due to the fold in the pages. Use the scroll buttons to specify the area to be erased from the center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1mm (0.04 inch) increments.

Original Size

This feature allows you to set the size of the document automatically, to select from a list of preset sizes, or to mix different size documents. If you select a preset size, documents will be copied according to the specified size regardless of their actual size.

1.Select [Original Size] on the [Layout Adjustment] screen.

2.Select the required option.

3.Select [Save].

Auto Detect

Automatically detects the size of standard sized documents.

59

Page 59
Image 59
Xerox 5230 manual Sided Book Copying, Original Size, Binding Edge Erase, Start & End Pages, Auto Detect