More Fax Options - Fax

Off

Disables the feature.

On

Sets the F Code transmission. [F Code] and [Password] are displayed at the right side of the screen.

F Code - You can enter an F Code composed of spaces, numerals (0-9), and symbols (#, *) up to 20 characters. Enter the code using the numeric keypad on the control panel.

Password - You can enter a password composed of spaces, numerals (0-9), and symbols (#, *) up to 20 characters. Enter the code using the numeric keypad on the control panel.

More Fax Options - Fax

This section describes the advanced features available for fax transmissions. For information, refer to the following:

Remote Polling – page 107

Store for Polling – page 108

On-hook (Manual Send/Receive) – page 110

1.Make sure that the Fax service is enabled.

2.Press the <All Services> button on the control panel.

3.Select [Fax] on the touch screen.

4.Select the [More Fax Options] tab.

5.Select the required feature.

Remote Polling

This feature allows you to retrieve a document from a remote machine, referred to as “remote polling”. The remote machine information is entered using the same method for sending faxes, but the [Remote Polling] option is used to initiate retrieving the fax from the remote machine. You must know the mailbox number and the passcode (if set up) of the remote machine to retrieve the document.

NOTE: To poll a document from a remote machine, the remote mailbox feature must be enabled. For more information, refer to Remote Mailbox on page 105.

NOTE: The DTMF (dual tone multi-frequency) method and F Code (ITU-T subaddress) method can also be used to poll a document from a remote machine. For more information, refer to Special Characters on page 86 or F Code on page 106.

107

Page 107
Image 107
Xerox 5230 manual More Fax Options Fax, Remote Polling