Modes

<Energy Saver> light is on. The Sleep Mode is cancelled when the <Energy Saver> button is pressed, or a fax or print job is received by the machine. The factory default setting of 10 minutes is customer changeable within the range of 2 to 60 minutes, and must be longer than the Low Power Mode time value. The time specified for entering the Sleep Mode will be counted from when the machine enters the Low Power Mode.

NOTE: For information on how to change the default time settings, refer to the Setups chapter in the System Administration Guide.

Modes

Use the following buttons to access the screens which allow you to select features, monitor the status of jobs, and obtain general information on the machine:

All Services

Features

Job Status

Machine Status

NOTE: These buttons do not respond when the machine is in the System

Administration mode.

<All Services>

button

<Features>

button

<Job Status>

button

<Machine Status> button

All Services

Use this button to access all the services available on the machine.

NOTE: The arrangement of service icons displayed on the screen can be changed by the System Administrator.

1.Press the <All Services> button on the control panel.

Features

Use this button to return the display to the previous service screen when the Job Status screen or Machine Status screen is displayed. The previous service screen may not appear, even if you press this button, if you are in one of the service screens. In this case, use the <All Services> button to select the required service.

41

Page 41
Image 41
Xerox 5230 manual Modes, All Services, Features