1 Before Using the Machine
The product may be configured to be compatible with other country networks.
Please contact your Xerox representative if it needs to be reconnected to another country's network.
NOTE: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling it is recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call setup. Modification, connection to external control software or to external control apparatus not authorized by Xerox, will invalidate its certification.
Regulatory Information for RFID
Regulatory Information for RFID
This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency Identification device (RFID). This RFID device complies with the requirements specified in FCC Part 15, Industry Canada
Operation of this device is subject to the following two conditions:
1.this device may not cause harmful interference, and
2.this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this equipment not specifically approved by the Xerox Corporation may void the user's authority to operate this equipment.
Environmental Compliance
USA
ENERGY STAR®
As an ENERGY STAR® partner, Xerox Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks. The ENERGY STAR Imaging Equipment Program is a team effort between U.S., European Union and Japanese governments and the office equipment industry to promote
Xerox ENERGY STAR equipment is preset at the factory. Your machine will be delivered with the timer for switching to Sleep Mode from the last copy/print out, set at 10 minutes. A more detailed description of this feature can be found in the Setups chapter in the System Administration Guide.
20
