Xerox 5230 manual Job Interrupt, Job Status, Machine Status

Models: 5230

1 180
Download 180 pages 29.02 Kb
Page 42
Image 42
Job Status

2 Product Overview

Job Status

Use this button to check the progress of a job, or display the log and detailed information of completed jobs. The latest job is displayed at the top of the list. Use this button to also check, delete, or print stored documents or documents in the machine’s mailboxes. For more information, refer to the Job Status chapter in the System Administration Guide.

Machine Status

Use this button to check the machine status, the billing meter, and the status of consumables, or to print various reports. This button is also used when accessing the System Administration mode. For more information, refer to the Machine Status chapter in the System Administration Guide.

Job Interrupt

Use this feature to temporarily suspend the current job to allow an urgent job to be initiated.

NOTE: The machine identifies a convenient point to interrupt the current job.

1.Press the <Interrupt> button on the control panel.

2.Enter the commands for the new job.

3.Press the <Start> button on the control panel.

4.To restart the interrupted job, press the <Interrupt> button again, and press the <Start> button.

<Interrupt> button

NOTE: Interrupted jobs cannot be promoted, released, or deleted in the print queue.

Attaching the Tray Attachment to the Office Finisher LX (Optional)

When unstapled A4 LEF, 8.5 x 11” LEF, or B5 LEF paper is output to the Finisher tray, using the tray attachment is recommended.

1.Remove the tray attachment

from under the Office Finisher LX tray.

42

Page 42
Image 42
Xerox 5230 manual Job Interrupt, Job Status, Machine Status